Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
CAUTION: Do not install any rubber hoses or steel tubing with a bend entering the filter greater than 60 degrees.
Using a suitable length of hose install the filter. Tighten the hose clamps.
6. Install one cooler tube retainer as illustrated.
7. Secure the cooler tubes together with a tie strap.
8. Clean a section of the transmission fluid pan and install the sticker.
9. Fill the transmission with clean automatic transmission fluid.
^
Verify for correct operation.
^
Check the filter for leaks.
