Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
7. Install the stub shaft pilot bearing into the rear axle housing bore.
8. Install the seal onto the special tools.
9. Carefully align the stub shaft pilot bearing seal with the housing bore and install the stub shaft pilot bearing seal.
^
Strike only the handle. Directly striking the installer tool will damage the seal.
10. CAUTION: Use the seal protector to avoid damaging the seal with the halfshaft.
CAUTION: Inspect the stub shaft seal journal for rust, nicks, or scratches prior to installing the halfshaft. Polish the seal journal with fine crocus
cloth, if required.
Install the halfshaft.