Navigator 4WD V8-5.4L SOHC VIN L (1998)
8. Install the upper door trim panel screw.
9. Connect the electrical connectors.
10. NOTE: If trim panel replacement is required: Some replacement trim panels have a cut out opening for the window switchplate that is larger than
that on the original trim panel. When replacing the trim panel, install the window switchplate in the following sequence to make sure that the
switchplate is secured fully into the door trim panel.
Install the window regulator switchplate.
-Insert the rear switchplate clip into the trim panel opening.
-Install the forward and side clips into the trim panel opening.
11. NOTE: Install the lower portion first.
Install the sail panel.
12. Connect the battery ground cable.
