Navigator 4WD V8-5.4L SOHC VIN L (1998)
Brake Hose/Line: Description and Operation
Brake Hose
CAUTION: Only Ford authorized inlet hydraulic brake tubes should be used. These tubes are of a specific design and should be replaced with Ford
authorized parts only.
Steel tubing with flex hoses are used in the hydraulic lines between the brake master cylinder and the hydraulic control unit. Steel tubing is used between
the hydraulic control unit and the front and rear hoses.
Double flared brake tubing should provide good leakproof connections.
When replacing hydraulic brake tubing, hoses, or connectors, tighten all connections securely. After replacement, bleed the brake system.
The wet appearance on the outer cover of rubber brake hoses is called "sweating." This is a normal condition for neoprene rayon braid hose and is not a
sign of leakage or cause for replacement of the hose.
