Navigator 4WD V8-5.4L SOHC VIN L (1998)
46.
Disconnect cylinder head temperature (CHT) sensor electrical connector. Refer to Figure 28.
47.
Disconnect tuning valve electrical connector. See Figure 28.
48.
Remove the intake manifold retaining bolts. See Figure 29.
49.
Remove intake manifold from vehicle.
50.
Remove and discard intake manifold gaskets.
NOTE:
On 5.4L engine, cam cover bolts cannot be separated from cam cover.
NOTE:
Be careful not to damage cam cover gaskets, as they will be reused. Remove both camshaft covers.
51.
Remove both camshaft covers.
