Navigator 4WD V8-5.4L SOHC VIN L (1998)
Radiator Hose: Service and Repair
Radiator Hoses (Upper)
REMOVAL
1. Partially drain the engine cooling system.
2. Remove the upper radiator hose.
1
Release the hose clamps and slide away from the hose ends.
2
Remove the upper radiator hose.
INSTALLATION
1. Install the upper radiator hose.
1
Position the upper radiator hose.
2
Compress and position the hose clamps.
NOTE: Make sure that the upper radiator hose is seated in the upper hose support bracket.
2. Fill the engine cooling system.
