Navigator 4WD V8-5.4L SOHC VIN L (1998)
5. Remove the muffler and tailpipe assembly.
NOTE: It may be necessary to heat the TWC joint to ease removal.
INSTALLATION
1. Position the muffler and tailpipe assembly.
CAUTION: Do not use oil or grease based lubricants on insulators which deteriorates the rubber.
2. Install the exhaust hanger insulators.
NOTE: A soap and water solution will ease installation of the muffler hangers into the rubber tailpipe hanger insulators.
3. Install the tailpipe into the exhaust hanger insulator.