Navigator 4WD V8-5.4L SOHC VIN L (1998)
Air Door Actuator / Motor: Service and Repair
Air Door Actuator
Air Inlet Door
REMOVAL
1. Remove the plenum chamber.
2. Remove the air inlet door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the vacuum control motor screws.
3
Remove the air inlet door vacuum control motor.
-
Rotate vacuum control motor to disconnect the vacuum control motor rod from air inlet door lever.
INSTALLATION
1. Follow the removal procedure in reverse order.
Defrost/Panel
REMOVAL
1. Carefully pry to release the four clips and remove the upper instrument panel steering column cover.
NOTE: To allow access to the steering column cover, shift to transmission range 1 and engage the parking brake.