Navigator 4WD V8-5.4L SOHC VIN L (1998)
Hose/Line HVAC: Service and Repair
Front Auxiliary Evaporator Outlet and Inlet Line
REMOVAL
NOTE: The front auxiliary evaporator outlet line is shown, the front auxiliary evaporator inlet line is similar.
1. Recover the refrigerant from the system.
2. Turn the air suspension switch off, if equipped.
3. Raise and support the vehicle.
4. Remove the RH front fender splash shield.
1
Remove the bolts.
2
Remove the pushpins.
3
Remove the front fender splash shield.
5. Remove the three line brackets.
1
Remove the nuts.
2
Remove the bracket by inserting a screwdriver in the bracket slot and twisting.
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
6. Disconnect the auxiliary outlet line from the condenser line.
1
Remove the nut.
2
Disconnect the line.
