Navigator 4WD V8-5.4L SOHC VIN L (1998)
Headlamp Lens: Adjustments
HEADLAMP ADJUSTMENT
1. Before starting headlamp assembly adjustment, check the following:
^
Tire inflation.
^
No other load is in the truck other than a half tank of gas.
^
Headlamps are clean.
^
Proper headlamp operation.
^
Vehicle is on level ground.
2. Aim the headlamps.
1
Turn the adjuster right or left to move the headlamp up or down.
2
Rotate the horizontal adjustment shaft clockwise to move the headlamp to the right, or counterclockwise to move the headlamp to the left.
3. Adjust the headlamps to specifications, located in the lower right corner of each headlamp.
