Navigator 4WD V8-5.4L SOHC VIN L (1998)
10. Install the line brackets.
1
Position the bracket.
2
Install the nut.
-
Snap the line into the bracket.
NOTE: The bracket must be positioned equally between the white location marks on the line.
11. Install the muffler heat shield.
1
Position the shield.
2
Install the nuts.
12. Lower the vehicle.
13. Turn on the air suspension switch, if equipped.
14. Install the grommet seal and retainer.
NOTE: Verify that the lines are entering through the center of the floor opening and that the retainer locating marks are positioned correctly.
