Navigator 4WD V8-5.4L SOHC VIN L (1998)
1. Route the power steering reservoir pump hose in the vehicle. Connect the power steering reservoir pump hose.
2. Position the power steering pump.
3. Loosely install the bolts.
4. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR
TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION
SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN SHIFTING OF THE VEHICLE
DURING THESE OPERATIONS.
5. Install the bolt.
