Navigator 4WD V8-5.4L SOHC VIN L (1998)
Gear Sensor/Switch: Service and Repair
REMOVAL
1. Remove the center instrument panel trim panel.
2. Remove the shift range selector switch.
1
Remove the shift range selector switch knob.
2
Disconnect the shift range selector switch electrical connector.
3
Remove the two shift range selector switch bolts.
4
Remove the shift range selector switch.
INSTALLATION
1. Install the shift range selector switch.
1
Position the shift range selector switch.
2
Install the bolts.
3
Install the electrical connector.
4
Install the knob.