Navigator 4WD V8-5.4L SOHC VIN L (1998)
Alarm Module: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the PATS module.
1
Disconnect the electrical connector.
2
Remove the screws.
3
Remove the PATS module.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.