Navigator 4WD V8-5.4L SOHC VIN L (1998)
4. Install the snap ring.
5. Use Sector Shaft Seal Replacer to install the sector shaft dust seal.
-
Lubricate the steering gear sector shaft dust seal; use Multi-Purpose Grease. DOAZ-19584-AA or equivalent meeting Ford specifications
ESB-M1C93-B and ESR-M1C159-A.
NOTE: Place the steering gear sector shaft dust seal on Sector Shaft Seal Replacer so the raised lip is toward the tool.
6. Remove the steering gear housing from Bench Mounted Holding Fixture.
7. Position the input shaft bearing in the valve housing and use Input Shaft Bearing/Seal Tool Set and a press to seat the bearings
8. Use Input Shaft Bearing/Seal Tool and a press to seat the power steering gear input shaft seal.
