lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Compressor/Pump Relay, Suspension Control > < Air Suspension - Repeat Compressor Drier Failures|Page 8455
Page 2
background image

INSTALLATION 

1. To install, reverse the removal procedure.

NOTE: 

-

When reinstalling air lines into compressor drier a maximum of 3 mm (1/8 in) of visible white air line must be installed for correct
installation.

-

When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

-

After installing the air compressor it is necessary to inflate the air suspension system. See: Service and Repair/Procedures/Inflating and
Deflating the Air Suspension System

Compressor/Pump Relay, Suspension Control > < Air Suspension - Repeat Compressor Drier Failures|Page 8455