lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Suspension Mode Switch > < Suspension - Warning Lamp ON/DTC's C1770/C1845|Page 8521
Page 3
background image

(2) Remove the air suspension control module.

INSTALLATION 

1. To install, reverse the removal procedure.

NOTE:  

-

When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

-

The air suspension control module is calibrated with information from the ride height sensor. A new or exchanged air suspension control
module requires that the ride height adjustment calibration process be performed; refer to Front Ride Height Resetting-Clear B2140 DTC.

Suspension Mode Switch > < Suspension - Warning Lamp ON/DTC's C1770/C1845|Page 8521