Navigator 4WD V8-5.4L SOHC VIN L (1998)
(2) Remove the front brake anti-lock sensor.
7. Remove the wheel hub.
(1) Remove the bolts.
(2) Push the CV joint inboard. Remove the wheel hub.
CAUTION: Do not over extend CV joint and boots when removing the hub and bearing assembly.
NOTE: The CV joint is a slip fit into the wheel hub and bearing. A puller will not normally be required.
8. Remove the seal.
INSTALLATION
1. Install the seal.
-
Use Knuckle Seal Replacer, Threaded Drawbar and Bearing Cup Replacer to install the seal.