Navigator 4WD V8-5.4L SOHC VIN L (1998)
5. Lower the transmission jack while aligning the (A) transmission insulator and retainer studs with the holes in the (B) transmission support
crossmember. Allow the full weight of the transmission to rest on the transmission support crossmember.
6. Install the transmission insulator and retainer-to-crossmember retaining nuts.
7. Remove the (A) High lift Transmission Jack with the (B) E40D Transmission Jack Adapter from the (C) transmission.
8. Reinstall the transmission fluid pan-to-case retaining bolts removed to install the jack adapter.
