Navigator 4WD V8-5.4L SOHC VIN L (1998)
2. Position the rear suspension upper front arm and bushing, and install the retainer bolt.
-
Repeat for the other side.
3. Position the rear suspension arm and bushing and install the retainer bolt.
-
Repeat for the other side.
4. Raise the rear axle with the jack until the rear suspension arm and bushing are parallel to the ground, and install the shock absorber retainer bolts.
-
Repeat for the other side.
5. Tighten the rear suspension arm and bushing.
-
Repeat for the other side.
