Navigator 4WD V8-5.4L SOHC VIN L (1998)
64. Verify the vacuum motor operation (disengage).
-
Use the Vacuum Pump to apply vacuum to the inner vacuum port to move the shift lever inboard. Rotate one axle to verify disengagement.
65. Remove the axle assembly from the Bench Mounted Holding Fixture and place it on the bench.
66. CAUTION: The differential cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If possible,
allow one hour before filling with lubricant to make sure the silicone sealant has properly cured.
Use Ford Black Silicone Rubber F4AZ-19562-B or equivalent meeting Ford specification WSE-M4G323-A1 and ESE-M46195-A to fill the
sealing groove on the axle housing cover.
67. Install the axle housing cover.
1
Position the axle housing cover.
2
Install the bolts.
