Navigator 4WD V8-5.4L SOHC VIN L (1998)
20. Remove the differential ring gear.
-
Remove the ten differential ring gear bolts.
-
Use a drift punch to separate the differential ring gear from the differential case.
21. Install the differential case in the housing without the ring gear.
1
Position the differential case.
2
Install the bearing caps.
3
Install the bearing cap bolts.
22. Position the Dial Indicator with Bracketry.
1
Rotate the differential case to ensure the differential bearings are properly seated.
2
Position the Dial Indicator with Bracketry.
23. NOTE: See the specification for maximum differential case runout.