Navigator 4WD V8-5.4L SOHC VIN L (1998)
allow one hour before filling with lubricant to make sure the silicone sealant has properly cured.
Install the axle housing cover.
1
Install the axle housing cover.
2
Install the 10 axle housing cover bolts.
4. NOTE: Service refill capacities are determined by filling the rear axle with the specified lubricant 6.4-14.3 mm (1/4-9/16 inch) below the bottom
of the filler hole.
Fill the rear axle with 2.37 liters (5 pints) of Synthetic Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification
WSL-M2C192-A and install the filler plug.
-
For Traction-Lok(R) axles, first fill the rear axle with 118 ml (4 oz) of specified Ford Friction Modifier.
5. Lower the vehicle.
