Navigator 4WD V8-5.4L SOHC VIN L (1998)
4. NOTE: Apply only a light oil film on the pinion bearings before assembling the tool.
Assemble and position the Pinion Depth Gauge set.
1
Position the Screw.
2
Position the Pinion Depth Aligning Adapter.
3
Position the Gauge Disc.
4
Position the Gauge Block.
5
Position the inner pinion bearing.
6
Position the outer pinion bearing.
7
Thread on the Driver Handle.
5. Tighten the Driver Handle to the specification.
