Navigator 4WD V8-5.4L SOHC VIN L (1998)
11. Position the clamp protector and the inboard boot clamp on the inboard CV joint housing.
12. Fill the inboard CV joint housing with 235 grams of grease.
-
Use High Temp Constant Velocity Joint Grease E43Z-19590-A provided in the boot kit meeting Ford specification ESP-M1C207-A.
13. Position the inboard CV joint housing and install the retaining ring.
14. Remove any excess grease from the mating surface and position the inboard front wheel halfshaft joint boot.
