Navigator 4WD V8-5.4L SOHC VIN L (1998)
1. Lubricate the lip of the inner wheel bearing oil seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Do not damage the inner wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1
Position the two U-washers on the button ends of the axle shafts.
2
Pull the axle shafts outward.
4. NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock(R) and Sealer EOAZ-19554-FF or equivalent meeting
Ford specifications WSK-M2G315-A5 and ESE-M4G204-A2 prior to installation.
