Navigator 4WD V8-5.4L VIN 5 (2006)
Body Control Module: Service and Repair
Driver Seat Module (DSM)
DRIVER SEAT MODULE (DSM)
Removal and Installation
CAUTION:
-
Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
-
Prior to the removal of the module, it is necessary to upload module configuration information to the appropriate diagnostic equipment.
This information needs to be downloaded into the new module once installed.
1. NOTE: The module is accessed with the seat fully in the UP position.
Position the driver seat module forward to remove it from the bracket.
2. Disconnect the battery.
3. Disconnect the electrical connectors and remove the DSM.
4. CAUTION: Once the module is installed it is necessary to download the module configuration information from the diagnostic tool into
the new module.
To install, reverse the removal procedure.