Navigator 4WD V8-5.4L VIN 5 (2006)
Trunk / Liftgate Solenoid: Service and Repair
Liftgate Latch Actuator
LIFTGATE LATCH ACTUATOR
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the liftgate trim panel.
2. Position the watershield aside.
3. Release the liftgate latch actuator rod from the liftgate latch.
4. Disconnect the liftgate latch actuator electrical connector.
5. Remove the rivet and the liftgate latch actuator.
6. To install, reverse the removal procedure.
-
Use the Heavy Duty Riveter to install the new rivet.