Navigator 4WD V8-5.4L VIN 5 (2006)
Upper and lower body support mount
1. Remove the body mount bolt and lower body mount.
-
To install, tighten to 80 Nm (59 lb-ft).
Upper body mount
2. Loosen the remaining body mount bolts.
3. Raise the vehicle body enough to remove the upper body mount.
Upper and lower body mount
4. NOTE:
-
No lubricants of any kind are to be used during body mount installation.
-
Do not reuse body mount fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
To install, reverse the removal procedure.
