Navigator 4WD V8-5.4L VIN 5 (2006)
14. NOTE: The inset shows the driver seat module (DSM) retaining bracket.
Remove the DSM.
1
Pull the back of the DSM away from the seat and slide it off the mounting bracket.
2
Disconnect the electrical connectors.
3
Remove the DSM.
Climate controlled seats
15. Remove the seat fan motor.
16. Remove the climate controlled seat module.
17. Remove the seat cushion thermo-electric device.
18. Remove the cushion supply duct.
19. Unclip and remove the TED mounting bezel.
All seats
20. To assemble, reverse the disassembly procedure.
21. Install the 40 percent seat.
22. Repower the SRS.