Navigator 4WD V8-5.4L VIN 5 (2006)
Part 2
Disassembly and Assembly
1. Remove the 20 percent seat.
2. Remove the 20 percent seat backrest.
3. Release the cushion trim cover front J-clip.
4. Remove the 2 riser-to-cushion frame bolts.
-
To install, tighten to 30 Nm (22 lb-ft).
5. Release the remaining cushion trim cover J-clips.
6. Remove the cushion frame from the cushion foam pad.
7. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat cushion foam.
Remove the seat cushion cover from the foam pad.
8. To assemble, reverse the disassembly procedure.
Rear Seat Cushion - Third Row, 40 Percent
REAR SEAT CUSHION - THIRD ROW, 40 PERCENT