Navigator 4WD V8-5.4L VIN 5 (2006)
40 Perecent Cushion
Disassembly and Assembly
1. Remove the third row 40 percent seat.
2. Remove the third row 40 percent seat backrest.
3. Remove the inboard and outboard slide bracket-to-cushion frame nuts and remove the slide bracket from both sides of the seat cushion.
-
To install, tighten to 15 Nm (11 lb-ft).
4. Remove the 2 third row seat riser-to-cushion frame bolts and the riser.
-
To install, tighten to 30 Nm (22 lb-ft).
5. Release the cushion trim cover J-clips and remove the cushion frame.
6. CAUTION: Use care when separating the cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from