Navigator 4WD V8-5.4L VIN 5 (2006)
1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement
is within specification.
^
If out of specification, install new components as necessary.
Connecting Rod-Twist
1. Measure the connecting rod twist on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the measurement is
within specification.
^
If out of specification, install new components as necessary.
Connecting Rod-Piston Pin Side Clearance
1. Measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
^
If out of specification, install new components as necessary.
Connecting Rod-Bearing Journal Clearance
