2006 Navigator 4WD V8-54L VIN 5 Engine Oil Filter Adapter Service and Repair
Oil Filter Adapter: Service and Repair
Oil Filter Adapter
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Drain the engine cooling system. For additional information, refer to Cooling System.
3. Disconnect the engine oil pressure (EOP) sensor electrical connector.
4. Disconnect the lower radiator hose from the oil filter adapter and position it aside.
5. Disconnect the degas bottle coolant hose from the oil filter adapter and position it aside.
6. Remove and discard the engine oil filter.
7. Remove the 4 bolts and the oil filter adapter.
