Navigator 4WD V8-5.4L VIN 5 (2006)
NOTE: It may be necessary to push the valve down while compressing the spring.
Using the special tool, remove the 3 designated roller followers in the previous step from the RH cylinder head.
7. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into the
original locations.
Remove only the 3 roller followers shown in the illustration from the LH cylinder head.
8. CAUTION: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder. If a valve drops into the cylinder, the
cylinder head must be removed.