Navigator 4WD V8-5.4L VIN 5 (2006)
8. Remove the 4 exhaust manifold-to-catalytic converter nuts.
^
To install, tighten to 40 Nm (30 ft. lbs.).
9. CAUTION: Only use hand tools when removing the transmission mount-to-crossmember nuts or damage to the transmission mount can occur.
Loosen the 2 transmission mount-to-crossmember nuts.
^
To install, tighten to 103 Nm (76 ft. lbs.).
10. Remove the 2 bolts and the exhaust manifold heat shield.
^
To install, tighten to 10 Nm (89 inch lbs.).
4WD vehicles
11. Remove the front driveshaft.
All vehicles
