Navigator 4WD V8-5.4L VIN 5 (2006)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor
Air Inlet Door
VACUUM CONTROL MOTOR - AIR INLET DOOR
Removal and Installation
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Instrument
Panel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
2. Disconnect the air inlet door vacuum control motor vacuum connector.
3. Remove the 2 air inlet door vacuum control motor screws.
4. Remove the air inlet door vacuum control motor.
5. To install, reverse the removal procedure.
Floor Defrost Door
VACUUM CONTROL MOTOR - FLOOR DEFROST DOOR