Navigator 4WD V8-5.4L VIN 5 (2006)
2. Remove the nut and disconnect the A/C fitting.
-
Discard the O-ring seal.
-
To install, tighten to 8 Nm (71 lb-in).
3. Remove the nut and disconnect the A/C fitting.
-
Discard the O-ring seal.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the 2 bolts and the thermostatic expansion valve (TXV) manifold and tube assembly.
-
To install, tighten to 8 Nm (71 lb-in).
5. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
6. Evacuate, leak test and charge the refrigerant system.
