Navigator 4WD V8-5.4L VIN 5 (2006)
Removal and Installation
Expedition
1. CAUTION: Cover the end of the tool with tape to prevent damage to the trim panel.
NOTE: Use a thin-bladed tool to remove the headlamp switch bezel assembly.
Remove the headlamp switch and bezel assembly.
-
Disconnect the electrical connectors.
Navigator
2. Remove the instrument panel finish panel.
3. NOTE: Release the tabs to remove the headlamp switch.
Remove the 2 screws and the headlamp switch.
All vehicles
4. To install, reverse the removal procedure.