lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Module Communications Network|Page 4294 > < Module Communications Network|Page 4292
Page 13
background image

G3-G4

Normal Operation

The Navigator parking aid module communicates with the diagnostic tool through the medium speed controller area network (CAN), circuits 2180
(WH/BK) and 2181 (BK/YE). The Expedition parking aid module communicates with the diagnostic tool through the international standards
organization (ISO) 9141 communications network, circuit 70 (LB/WH). Check the communication circuits between the parking aid module C4226
(Expedition) or C4014b (Navigator) and the data link connector (DLC) C251. The total resistance values must not be more than 5 ohms. If the
resistance is more than 5 ohms there is an open in one of the communication network circuits, damage to the DLC C251, damage to the parking aid
module connectors, or a problem in an in-line connector.

Possible Causes

-

ISO 9141 circuit 70 (LB/WH) open (Expedition only)

-

medium speed CAN circuit 2180 (WH/BK) open (Navigator only)

-

medium speed CAN circuit 2181 (BK/YE) open (Navigator only)

-

parking aid module

-

parking aid module C4226 (Expedition) or C4014b (Navigator)

Test H: The Transmission Control Module (TCM) Does Not Respond To The Diagnostic Tool

PINPOINT TEST H: THE TRANSMISSION CONTROL MODULE (TCM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL

Module Communications Network|Page 4294 > < Module Communications Network|Page 4292