Navigator 4WD V8-5.4L VIN 5 (2006)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the LH rear interior quarter trim panel.
3. Disconnect the inertia fuel shutoff (IFS) switch electrical connector.
4. Remove the 2 bolts and the IFS switch.
-
To install, tighten to 10 Nm (89 lb-in).
5. To install, reverse the removal procedure.
