Navigator 4WD V8-5.4L VIN 5 (2006)
3. Remove the 3 bolts and the B-pillar trim panel bracket.
4. Remove the bolt and the safety belt retractor.
-
To install, tighten to 40 Nm (30 lb-ft).
5. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
When installing the safety belt retractor, make sure to engage the anti-rotation tab to the sheet metal
-
Remove the shipping clip after safety belt retractor installation.
To install, reverse the removal procedure.
6. Check the active restraint system for correct operation.