Navigator 4WD V8-5.4L VIN 5 (2006)
Alignment: Service and Repair
Camber Adjustment - Rear
Camber Adjustment - Rear
NOTE: Air suspension vehicles must be at trim ride height prior to measuring or adjusting the rear camber or toe.
1. Using alignment equipment and the manufacturers instructions, measure the rear caster.
^
Refer to Alignment Specifications for optimal alignment settings.
^
If the rear caster value is not within specification, go to the next step.
2. Determine desired camber adjustment (subtract the specified camber angle from the measured camber angle).
3. Mark a scribe line on the upper arm-to-wheel knuckle bolt head and upper arm.
Desired Camber Adjustment (In Degrees) (Part 1)