Navigator 4WD V8-5.4L VIN 5 (2006)
7. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 inch lbs.).
8. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual control lever nut.
^
Tighten to 33 Nm (24 ft. lbs.).
9. Connect the digital TR sensor electrical connector.
10. Connect the shift cable end to the manual lever with the lever in the (D) position.
