Navigator 4WD V8-5.4L VIN 5 (2006)
Installation
TSS sensor
1. Lubricate the O-ring seal and install the TSS sensor.
2. Install the TSS sensor bolt.
^
Tighten to 11 Nm (8 ft. lbs.).
3. Connect the TSS sensor electrical connector.
OSS sensor
4. Lubricate the O-ring seal and install the OSS sensor.
5. Install the OSS sensor bolt.
^
Tighten to 12 Nm (9 ft. lbs.).
6. Connect the OSS sensor electrical connector.
