Navigator 4WD V8-5.4L VIN 5 (2006)
5. Remove the sun visors.
1
Remove the 4 screws.
2
Remove the 2 sun visor and visor arm clips.
-
If equipped, disconnect the electrical connectors.
6. Lower the front portion of the headliner.
7. Remove the windshield side mouldings.
-
Pull out starting at the top corner.
8. Remove the upper windshield weatherstrip.
-
Pull out starting at the corner.
9. Mark the outside of the windshield glass with a wax pencil to avoid damaging the glass stops when cutting the urethane.
10. Using a soft brush or vacuum, remove any dirt and foreign material from the pinch weld.
