Navigator 4WD V8-5.4L VIN 5 (2006)
Wiper Motor Linkage: Service and Repair
Wiper Mounting Arm and Pivot Shaft - Windshield
WIPER MOUNTING ARM AND PIVOT SHAFT - WINDSHIELD
Removal and Installation
1. Remove the cowl grille panel.
2. Disconnect and position the hood light harness aside.
3. Remove the hood struts.
-
Using a suitable tool support the hood.
4. Remove the mounting arm and pivot shaft assembly.
1
Disconnect the electrical connector and position the wiring harness aside.
2
Remove the bolts.
-
To install, tighten to 8 Nm (71 lb-in).
5. To install, reverse the removal procedure.