lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Decklid Power Pull-Down - Inoperative|Page 6412 > < Diagram Information and Instructions|Page 6403
Page 1
background image

Trunk / Liftgate Switch: Customer Interest
Decklid Power Pull-Down - Inoperative

Article No.
96-5-1

02/26/96

DECKLID - POWER PULL-DOWN - INOPERATIVE

LINCOLN-MERCURY:
1988-94 CONTINENTAL
1988-96 TOWN CAR

This TSB article is being republished in its entirety to include 1994 through 1996 model years and to update the part numbers.

ISSUE:
An inoperative Decklid Power Pull-Down may be the result of an inoperative power pull-down switch.

ACTION:
Replace the power pull-down switch if it is found to be defective. Do not replace the entire power pull-down assembly; a service switch is available as a
separate part. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

SWITCH - DIAGNOSIS/REMOVAL

1.

Remove carpeting surrounding the pull-down unit.

2.

Disconnect harness connector from switch (Figure 3).

Decklid Power Pull-Down - Inoperative|Page 6412 > < Diagram Information and Instructions|Page 6403