Town Car V8-281 4.6L SOHC (1991)
a.
Install the tie wrap strap through the existing holes in the bracket, Figure 1.
b.
Wrap the strap around the actuator over the rubber watershield.
c.
Pull the strap tight enough to remove any slack in the strap (about 2 lbs. pull).
d.
Cut off the excess strap.
NOTE:
THE TIE WRAP STRAP KNOT MUST BE LOCATED AWAY FROM THE BRACKET HOLES SO THE RETAINER PUSH PIN CAN BE
INSTALLED INTO THE BRACKET HOLE.
5.
Install the revised assembly on the door per the Service Manual procedure.
PART NUMBER
PART NAME
CLASS
95874-S
Tie Wrap Strap (Pk/10)
AG
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under Bumper To Bumper Warranty Coverage. For 1992/93 Model Year Vehicles And 1991 Lincolns. Eligible Under Basic Warranty
Coverage For All Other Model Year Vehicles.