Town Car V8-281 4.6L SOHC (1991)
NOTE: If copper links of timing chain are not visible, split the chain in half and mark the two opposing links as shown.
6. Install Left Hand timing chain on camshaft gear. Ensure copper link of chain lines up with timing mark of camshaft gear.
7. Install Left Hand timing chain on crankshaft gear. Ensure copper link of chain lines up with timing mark of crankshaft gear.
8. Install Right Hand crankshaft gear.
NOTE: Ensure tapered part of gear faces TOWARD engine block.
9. Install Right Hand timing chain on camshaft gear. Ensure copper link of chain lines up with timing mark of camshaft gear.
10. Install Right Hand timing chain on crankshaft gear. Ensure copper link of chain lines up with timing mark of crankshaft gear.
NOTE: It will be necessary to bleed down timing chain tensioners prior to installation. Refer to Timing Chain Tensioner: Adjustments.
11. Lubricate tensioner arm contact surfaces with engine oil and install Right Hand and Left Hand tensioner arms on their dowels.
12. Install Right Hand and Left Hand timing chain tensioners and secure with two bolts on each. Tighten bolts to 20-30 Nm (15-22 ft-lbs).
NOTE: Do not remove lock pins until timing chain guides are installed.
